Duplomatic DSE5J - Directional Proportional Valves - Feedback & OBE

Duplomatic Oleodinamica designs and produces a complete range of hydraulic components that are suitable for all application sectors of both industrial and mobile fields.

The DSE5J is a direct operated directional proportional valve, CETOP 05, with integrated electronics (OBE - On Board Electronics), position feedback and mounting interface in compliance with ISO 4401 (CETOP RP 121H) standards. It is normally used to control the direction and the speed of hydraulic actuators. The valve opening and hence flow rate can be modulated continuously in proportion to the reference signal. Transducer and digital card allow a fine control of the positioning of the cursor, reducing hysteresis and response time and optimizing the performance of the valve.

The valve is easy to install. The driver directly manages digital settings. In the case of special applications, you can customize the settings using the optional kit. This proportional valves are normally used to control the direction and the speed of hydraulic actuators. Transducer and digital card allow a reduced hysteresis and repeatability (lower than 0.2%), a response time of 60 Hz (at < 90° with a signal of 10%), and pressure gain that enables to reach the 80% of total pressure at 2% of reference signal. The digital driver gives great performances, i.e. the response times reduction, the perfect interchangeability among different valves, the possibility to modify parameters via software. 

A spool with mechanical zero overlap is available, and the optional kit LINPC-USB/10 that enables the reading of the values coming from the external command, allows the exclusion of PLC to control the valve directly, and inteface PC and electronic card.