SUT00S1510-30 Daikin Super Unit - Hydraulic Power Pack image

SUT00S1510-30 Daikin Super Unit - Hydraulic Power Pack

Daikin

View all specifications

SUT00S1510-30 Super Unit - Hydraulic Power Pack

Daikin's Super Unit has turned the conventional industrial hydraulic power pack on its head and made it into something very special indeed.

We live in a world that demands significant reductions in energy consumption. Conventional hydraulic power pack units utilised within industrial applications unnecessarily consume large amounts energy due to the nature of their design and configuration.

Daikin utilise their high efficiency interior permanent magnet (IPM) motor technology (previously pioneered and utilised in their successful air conditioning units) to give a variable speed drive solution to their hydraulic power pack. IPM motors operate at a 93% efficiency which is considerably more efficient than a conventional induction motor (typically 70-80%) In addition to their efficiency, IPM motors also give huge improvements in torque output during their required operating RPM, this results in a consistent pressure output from the hydraulic gear pump even at varying flow demands.

Daikin offer a broad range of Super Units to choose from (14 models in total)

Flow range: 15 ~ 110 litres/minute.

Operating pressure range: 70 ~ 206 bar

Product Features

Energy Saving - high effieciency IPM motors provide huge savings (typically 50%)
Low noise (just 60dB at 206 bar with the double pump unit)
Multi stage pressure/flow rate control - sixteen pressure (P) and flow (Q) settings are avaiable
Maintenence/management function - Internal data of the super unit can be managed via using a connected laptop
Excluded from high-efficiency motor regulations - Super units that incorporate IPM motors are excluded from these regulations
Reduce your control valves! Using on-board parameter settings, conventional flow and pressure control valves are not required
Remote control operation - PLC compatible through RS232C serial communication
Analog command input - Enables continious control of pressure & speeds as required

Looking to repair your Daikin Super Unit?

We carry a broad range of spares for the Daikin Super Unit so if you either wish to repair your unit yourself or would like us to do it for you, we're able to assit. Please call +44(0)1172 130042 or Email with your Super Unit part number and serial number to discuss your requirements.

Downloads & Datasheets

Tankless type

Super unit - Part Number:		SUT00S1507-30	SUT00S3007-30	SUT00S4007-30	SUT00S6007-30	SUT00S8007-30	SUT00S11007-30
Pump unit	Max flow rate (theoretical value l/min)	15.2	28.5	39.7	61.1	83.0	110
	Max operating pressure (Bar)	70	70	70	70	70	70
	Operating flow rate adjustment range l/min	2.5 ~ 15.2	3.5 ~ 28.5	5.3 ~ 39.7	8.7 ~ 61.1	11.6 ~ 83.0	13.3 ~ 110
	Operating pressure adjustment range (Bar)	15 ~ 70	15 ~ 70	15 ~ 70	1.5 ~ 70	15 ~ 70	15 ~ 70
Motor capacity	Motor capacity (equivelant KW)	Equivelant to 2.2 KW	Equivelant to 2.8 KW	Equivelant to 3.7 KW	Equivelant to 5.0 KW	Equivelant to 7.0 KW	Equivelant to 11.0 KW
Power supply	Motor/pump unit	3-phase, 200V (50Hz), 200V (60Hz), 220V (60Hz) (Permissable voltage function +/- 10%)
Rated current (A)	AC3 200V (50Hz)	11.5	15.4	16.1	22.1	25.5	38.3
	AC3 200V (60Hz)	11.3	15.1	15.8	21.7	24.8	37.8
	AC3 220V (60Hz)	10.6	13.8	14.8	20.2	22.7	34.9
Power source breaker setting (A)		15	20	20	30	50	75
External Input signal		5 channels
External Input signal		Photo-coupler insulation, DC 24V (DC 27V maximum), 5 mA/channel
External output signal	Digital output	2 channels, photo coupler insulation, FET output, DC 24V, 50mA maximum per channel
External output signal	Contact output	1 channel (1 common contact), dry contact. Contact capacity: DC30V, 0.5A (resistance load)
Mass (kg)		37	39	46	56	72	112
Operating conditions	Useable oil	Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil. Viscosity grade: ISO VG32 to 68. Viscosity range: 15 to 400 mm2/s. Contamination: Within NAS class 10. Volumetric water content: 0.1% maximum
	Operating hydraulic oil temp (in tank)	0 - 60°C (Recommended operating temperature range: 15 ~ 50°C)
	Operating ambient temp	0 ~ 40°C
	Storage ambient temp	-20 ~ 60°C
	Operating ambient humbidity	85% RH max. (No condensation)
	Installation site	Indoors (Be sure to secure the unit with bolts)
	Other details	1: Be sure to connect a circuit breaker for all 3 poles and the earth leakage breaker.
		2: Make sure that the electrical wiring meets the requirement of European Standard EN60204-1
		3: Frequently turning the power supply off to the Super unit will shorten the service life - avoid where possible
		4: Be sure to connect the ground terminal
Tank capacity (litres)		N/A	N/A	N/A	N/A	N/A	N/A
Standard coating colour		Ivory white (Munsell code: 5Y7. 5/1)

Super unit - Part Number:		SUT00S1510-30	SUT00S3010-30	SUT00S1516-30	SUT00S3016-30	SUT0000D4016-30	SUT00D6021-30
Pump unit	Max flow rate (theoretical value l/min)	15.2	25.6	15.2	25.6	41.0	61.1
	Max operating pressure (Bar)	100	100	160	160	157	206
	Operating flow rate adjustment range l/min	2.5 ~ 15.2	3.4 ~ 25.6	2.4 ~ 15.2	3.4 ~ 25.6	5.4 ~ 41.0	8.7 ~ 61.1
	Operating pressure adjustment range (Bar)	25 ~ 150	15 ~ 100	15 ~ 160	1.5 ~ 160	15 ~ 157	15~ 206
Motor capacity	Motor capacity (equivelant KW)	Equivelant to 2.8 KW	Equivelant to 3.7 KW	Equivelant to 3.7 KW	Equivelant to 5.0 KW	Equivelant to 3.7 KW	Equivelant to 5.0 KW
Power supply	Motor/pump unit	3-phase, 200V (50Hz), 200V (60Hz), 220V (60Hz) (Permissable voltage function +/- 10%)
Rated current (A)	AC3 200V (50Hz)	8.0	18.4	16.1	21.4	17.9	22.1
	AC3 200V (60Hz)	7.8	18.4	15.8	21.4	17.7	21.7
	AC3 220V (60Hz)	7.5	16.9	14.8	20.2	16.5	20.2
Power source breaker setting (A)		15	20	20	30	20	30
External Input signal		5 channels
External Input signal		Photo-coupler insulation, DC 24V (DC 27V maximum), 5 mA/channel
External output signal	Digital output	2 channels, photo coupler insulation, FET output, DC 24V, 50mA maximum per channel
External output signal	Contact output	1 channel (1 common contact), dry contact. Contact capacity: DC30V, 0.5A (resistance load)
Mass (kg)		39	46	46	52	53	58
Operating conditions	Useable oil	Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil. Viscosity grade: ISO VG32 to 68. Viscosity range: 15 to 400 mm2/s. Contamination: Within NAS class 10. Volumetric water content: 0.1% maximum
	Operating hydraulic oil temp (in tank)	0 - 60°C (Recommended operating temperature range: 15 ~ 50°C)
	Operating ambient temp	0 ~ 40°C
	Storage ambient temp	-20 ~ 60°C
	Operating ambient humbidity	85% RH max. (No condensation)
	Installation site	Indoors (Be sure to secure the unit with bolts)
	Other details	1: Be sure to connect a circuit breaker for all 3 poles and the earth leakage breaker.
		2: Make sure that the electrical wiring meets the requirement of European Standard EN60204-1
		3: Frequently turning the power supply off to the Super unit will shorten the service life - avoid where possible
		4: Be sure to connect the ground terminal
Tank capacity (litres)		N/A	N/A	N/A	N/A	N/A	N/A
Standard coating colour		Ivory white (Munsell code: 5Y7. 5/1)

Unit type (Complete with oil tank)

Super unit - Part Number:		SUT03S1507-30	SUT03S3007-30	SUT03S4007-30	SUT06S6007-30	SUT10S8007-30	SUT03S1510-30
Pump unit	Max flow rate (theoretical value l/min)	15.2	28.5	39.7	61.1	83.0	15.2
	Max operating pressure (Bar)	70	70	70	70	70	100
	Operating flow rate adjustment range l/min	2.5 ~ 15.2	3.5 ~ 28.5	5.3 ~ 39.7	8.7 ~ 61.1	11.6 ~ 83.0	2.5 ~ 15.2
	Operating pressure adjustment range (Bar)	15 ~ 70	15 ~ 70	15 ~ 170	1.5 ~ 70	15 ~ 70	15~ 100
Motor capacity	Motor capacity (equivelant KW)	Equivelant to 2.2 KW	Equivelant to 2.8 KW	Equivelant to 3.7 KW	Equivelant to 5.0 KW	Equivelant to 7.0 KW	Equivelant to 2.8 KW
Power supply	Motor/pump unit	3-phase, 200V (50Hz), 200V (60Hz), 220V (60Hz) (Permissable voltage function +/- 10%)
Rated current (A)	AC3 200V (50Hz)	11.5	15.4	16.1	22.1	25.5	8.0
	AC3 200V (60Hz)	11.3	15.1	15.8	21.7	24.8	7.8
	AC3 220V (60Hz)	10.6	13.8	14.8	20.2	22.7	7.5
Power source breaker setting (A)		15	20	20	30	50	15
External Input signal		5 channels
External Input signal		Photo-coupler insulation, DC 24V (DC 27V maximum), 5 mA/channel
External output signal	Digital output	2 channels, photo coupler insulation, FET output, DC 24V, 50mA maximum per channel
External output signal	Contact output	1 channel (1 common contact), dry contact. Contact capacity: DC30V, 0.5A (resistance load)
Mass (kg)		59	59	64	97	131	59
Operating conditions	Useable oil	Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil. Viscosity grade: ISO VG32 to 68. Viscosity range: 15 to 400 mm2/s. Contamination: Within NAS class 10. Volumetric water content: 0.1% maximum
	Operating hydraulic oil temp (in tank)	0 - 60°C (Recommended operating temperature range: 15 ~ 50°C)
	Operating ambient temp	0 ~ 40°C
	Storage ambient temp	-20 ~ 60°C
	Operating ambient humbidity	85% RH max. (No condensation)
	Installation site	Indoors (Be sure to secure the unit with bolts)
	Other details	1: Be sure to connect a circuit breaker for all 3 poles and the earth leakage breaker.
		2: Make sure that the electrical wiring meets the requirement of European Standard EN60204-1
		3: Frequently turning the power supply off to the Super unit will shorten the service life - avoid where possible
		4: Be sure to connect the ground terminal
Tank capacity (litres)		30	30	30	60	100	30
Standard coating colour		Ivory white (Munsell code: 5Y7. 5/1)

Super unit - Part Number:		SUT03S3010-30	SUT03S1516-30	SUT06S3016-30	SUT06D4016-30	SUT06D6021-30	SUT10D6021-30
Pump unit	Max flow rate (theoretical value l/min)	25.6	15.2	25.6	41.0	61.1	61.1
	Max operating pressure (Bar)	100	160	160	157	206	206
	Operating flow rate adjustment range l/min	3.4 ~ 25.6	2.4 ~ 15.2	3.4 ~ 25.6	5.4 ~ 41.0	8.7 ~ 61.1	8.7 ~ 61.1
	Operating pressure adjustment range (Bar)	15 ~ 100	15 ~ 160	15 ~ 160	1.5 ~ 157	15 ~ 206	15~ 206
Motor capacity	Motor capacity (equivelant KW)	Equivelant to 3.7 KW	Equivelant to 3.7 KW	Equivelant to 5.0 KW	Equivelant to 3.7 KW	Equivelant to 5.0 KW	Equivelant to 5.0 KW
Power supply	Motor/pump unit	3-phase, 200V (50Hz), 200V (60Hz), 220V (60Hz) (Permissable voltage function +/- 10%)
Rated current (A)	AC3 200V (50Hz)	18.4	15.2	21.4	17.9	22.1	22.1
	AC3 200V (60Hz)	18.4	15.2	21.4	17.7	21.7	21.7
	AC3 220V (60Hz)	16.9	14.6	20.2	16.5	20.2	20.2
Power source breaker setting (A)		20	20	30	20	30	30
External Input signal		5 channels
External Input signal		Photo-coupler insulation, DC 24V (DC 27V maximum), 5 mA/channel
External output signal	Digital output	2 channels, photo coupler insulation, FET output, DC 24V, 50mA maximum per channel
External output signal	Contact output	1 channel (1 common contact), dry contact. Contact capacity: DC30V, 0.5A (resistance load)
Mass (kg)		64	64	83	94	99	112
Operating conditions	Useable oil	Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil. Viscosity grade: ISO VG32 to 68. Viscosity range: 15 to 400 mm2/s. Contamination: Within NAS class 10. Volumetric water content: 0.1% maximum
	Operating hydraulic oil temp (in tank)	0 - 60°C (Recommended operating temperature range: 15 ~ 50°C)
	Operating ambient temp	0 ~ 40°C
	Storage ambient temp	-20 ~ 60°C
	Operating ambient humbidity	85% RH max. (No condensation)
	Installation site	Indoors (Be sure to secure the unit with bolts)
	Other details	1: Be sure to connect a circuit breaker for all 3 poles and the earth leakage breaker.
		2: Make sure that the electrical wiring meets the requirement of European Standard EN60204-1
		3: Frequently turning the power supply off to the Super unit will shorten the service life - avoid where possible
		4: Be sure to connect the ground terminal
Tank capacity (litres)		30	30	60	60	60	100
Standard coating colour		Ivory white (Munsell code: 5Y7. 5/1)

Super unit - Part Number:		SUT10D8021-30	SUT16D8021-30	P-SUT20D11KW-30	SUT00D8021-30	SUT00D11021-30
Pump unit	Max flow rate (theoretical value l/min)	83.0	183.0	110	83.0	110
	Max operating pressure (Bar)	206	206	206	206	206
	Operating flow rate adjustment range l/min	11.6 ~ 83.0	11.6 ~ 83.0	13.3 ~ 110	11.6 ~ 83.0	13.3 ~ 110
	Operating pressure adjustment range (Bar)	15 ~ 206	15 ~ 206	15 ~ 206	1.5 ~ 206	15 ~ 206
Motor capacity	Motor capacity (equivelant KW)	Equivelant to 7.0 KW	Equivelant to 7.0 KW	Equivelant to 11.0 KW	Equivelant to 7.0 KW	Equivelant to 11.0 KW
Power supply	Motor/pump unit	3-phase, 200V (50Hz), 200V (60Hz), 220V (60Hz) (Permissable voltage function +/- 10%)
Rated current (A)	AC3 200V (50Hz)	25.5	25.5	38.3	25.5	38.3
	AC3 200V (60Hz)	24.8	24.8	37.8	24.8	37.8
	AC3 220V (60Hz)	22.7	22.7	34.9	22.7	34.9
Power source breaker setting (A)		50	50	75	50	75
External Input signal		5 channels
External Input signal		Photo-coupler insulation, DC 24V (DC 27V maximum), 5 mA/channel
External output signal	Digital output	2 channels, photo coupler insulation, FET output, DC 24V, 50mA maximum per channel
External output signal	Contact output	1 channel (1 common contact), dry contact. Contact capacity: DC30V, 0.5A (resistance load)
Mass (kg)		133	145	360	72	112
Operating conditions	Useable oil	Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil. Viscosity grade: ISO VG32 to 68. Viscosity range: 15 to 400 mm2/s. Contamination: Within NAS class 10. Volumetric water content: 0.1% maximum
	Operating hydraulic oil temp (in tank)	0 - 60°C (Recommended operating temperature range: 15 ~ 50°C)
	Operating ambient temp	0 ~ 40°C
	Storage ambient temp	-20 ~ 60°C
	Operating ambient humbidity	85% RH max. (No condensation)
	Installation site	Indoors (Be sure to secure the unit with bolts)
	Other details	1: Be sure to connect a circuit breaker for all 3 poles and the earth leakage breaker.
		2: Make sure that the electrical wiring meets the requirement of European Standard EN60204-1
		3: Frequently turning the power supply off to the Super unit will shorten the service life - avoid where possible
		4: Be sure to connect the ground terminal
Tank capacity (litres)		100	160	200	Tankless model	Tankless model
Standard coating colour		Ivory white (Munsell code: 5Y7. 5/1)

Write Review

There are currently no reviews for this product

Awaiting video

Related Categories

Hydraulic Power Packs

View